Healtech Electronics
BMW S1000XR 2015-2024
BMW S1000XR 2015-2024
SKU:ESE-SW-BM1
Bajas existencias: quedan 5
ES Eliminator SW
Switchable exhaust servo eliminator module
The ESE-SW is a special version of the Exhaust Servo Eliminator that lets you take control of the stock exhaust servo motor and valve. Now you can either fully open or close the exhaust valve with the supplied switch or let it work in stock mode for street use.
ESE-SW-BM1 Version 2.0 is due July 2024
The Switchable Exhaust Servo Eliminator (ESE-SW) is a special version of the highly successful Exhaust Servo Eliminator (ESE). It connects in line with the servo actuator motor and adds the ability for the rider to take full control of the servo motor. This comes in handy for instance when the bike is used both on public roads and for track riding/racing. The rider can fully open the exhaust valve (even while riding) by toggling the supplied (handlebar) switch. What are the benefits of such a setup? With the ESE-SW you can get the best of both worlds: street-wise the bike remains fully road-legal, while on the track you are not hindered by the servo motor by any means.
The ESE-SW is currently only available for BMW motorcycles.
Plug 'n Go
Comes with model-specific connectors, no splicing/soldering is required. Just plug it in and enjoy the ride!
Best of both worlds
The bike remains fully road-legal, while on the track you are not hindered by the servo motor by any means.
Quick and easy installation
It connects in line with the original servo motor, installation is super-quick and straightforward.
With the ESE-SW you can get the best of both worlds. Street-wise the bike remains fully road-legal, while on the track you are not hindered by the servo motor by any means. You have the option to control the exhaust valve operation with the switch supplied – even while riding.
You are in safe hands
The unit is completely sealed and epoxy encapsulated, which gives extreme protection for the internal parts from shocks, vibrations and water. All units have been extensively tested prior to shipment.
Plug ‘n Go installation
The Plug ‘n Go connector makes installation quick and easy, eliminating the need to alter the bike’s original wiring. Just locate the exhaust servo motor under the rider/passenger seat, disconnect the plugs, plug the ESE-SW in line with the servo motor, find a suitable place for the switch (handlebar preferably) route the cable of the switch and that’s it, you’re ready for the ride!
What's an Exhaust Servo & EXUP valve?
For the last two decades bikes have been equipped with an exhaust flap valve (also called as EXUP valve) to improve low down torque with the hindering of the flow of escaping gasses creating back pressure in the exhaust system. As the revs rise and the more you open the throttle, this valve opens more and more so the gasses can leave unblocked. This valve and its housing is welded after the header’s downpipes right before the collector pipe and/or the collector chamber/catalytic converter so removing this alone from the factory system is not worth the time, the money and the effort itself since the OEM system in the most cases is still low quality and heavy as hell. Of course, titanium OEM systems exist but finding an exhaust shop with titanium welding capabilities isn’t easy and will cost you an arm and a leg in labour to remove the exhaust valve from the system. So it’s easier and gives much better result to opt for an aftermarket end-can or whole system. Either way you take, you will need an Exhaust Servo Eliminator to complete the job properly!